binder takes M12 and M12 Power from the cabinet to the field


binder takes M12 and M12 Power from the cabinet to the field

Specifically, new control cabinet feed-through connectors will be available for the M12 product series 713, 813, 814, 823 and 824, which are available with different codings and pin counts.

The M12 or M12 Power type components (DIN EN 61076-2-111) allow signal, data, and supply cables to be connected using circular connectors of the same type from the respective series. They are equipped with an M12 locking thread and an M16 mounting thread, says the company.

The new binder products are available with A, S, K, L as well as T coding and, depending on the coding, with 3 to 8 pins.

binder writes:

The increasing degree of automation of industrial plants, driven by the trend towards digitalization and integration in the context of Industry 4.0, is generating a growing need for powerful yet space-saving and robust connection solutions for signals, data, and electrical power.

M12 connectivity offers efficient, reliable, and cost-effective cabling of fieldbuses, sensors, and actuators in the field l of automation technology. Using these standardized, robust connectors, complex installation concepts can be implemented in industrial environments – e.g., in smart factories – starting from the control cabinet and covering the entire shop floor. The compact design supports applications in confined spaces.

M12 Power specs

The products meet IP67 requirements and have a mechanical lifespan of >100 mating cycles. They are designed for operating temperatures between -40 °C and +85 °C.

The detailed technical data – such as protection degree, rated voltage and current, contact resistance, and others – varies from series to series according to the specifications of the respective binder M12 and M12 Power circular connectors.

For example, according to binder the following specifications apply to the control cabinet feed-throughs: In the case of 3-pin to 8-pin A-coding (713 series), the rated current and voltage depend on the wire cross-section of the corresponding connector and are 2 A at 30 V (8-pin) and 4 A at 60/250 V (3-5 pin), respectively. The rated impulse voltage is 800 V and 1500/2500 V, respectively. The mechanical lifespan is specified as >100 mating cycles.

The control cabinet feed-throughs of the 4-pin T-coded 813 series are specified for a rated current of 12 A at 63 V(DC). The rated impulse voltage reaches 1500 V. For the S-coded 814 series, the rated current, voltage and impulse voltage are specified as 16 A (pin count 2+PE) and 12 A (3+PE) as well as 630 V and 6000 V, respectively.

The 823 series with L-coding – pin count 4+FE (Functional Earth) – is specified for 16 A at 63 V(DC), for 1500 V rated impulse voltage as well as with ≤5 mΩ. The corresponding circular connectors of this series have been designed for wire gauges/cross-sections of 1.5 mm2 (AWG 16) with ferrule or for 2.5 mm2 (AWG 14) without ferrule.

The feed-throughs of the K-coded 824 series are available with 4+PE pins. They are rated 12 A at 630 V and withstand impulse voltages of up to 6000 V.

You can read more info at www.binder-connector.co.uk





Source link

We will be happy to hear your thoughts

Leave a reply

TECH DEVIL
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0
Shopping cart